Sr. | Item | Description | |
1 | Inner Seal (Chamber) | SS 304L Thickness: 5mm | |
2 | Chamber Operating Pressure | Negative pressure cycle | |
3 | Chamber Testing Pressure | 1.5 Kg/cm2 | |
4 | Single Door | SS 304L Thickness: 10mm | |
5 | Gasket | Silicon Gasket (10/12 mm solid section) | |
6 | Steam Generator | SS 316L Thickness: 3mm | |
7 | Outer cover | Factory Finished (Poly-coated) MS | |
8 | Heating | SS 316L Heaters on all sides of the Chamber for uniform heating throughout the load. | |
9 | Temp Sensor | For accurate measuring and controlling of Temp. in the chamber | |
10 | Operating Temp | Maximum: 45°C to 55°C (chamber)
(1) Medium Cycle: 35°C to 45°C (2) Cool Cycle: 35°C to 40°C (3) Hot Cycle: 48°C to 55°C |
|
11 | RH% Sensor | For measuring and controlling the humidity of the chamber | |
12 | Pressure Transmitter | For measuring and controlling the pressure-vacuum that the load is subjected to during
removal and charging of Gas. |
|
13 | All fittings on the Machine | SS 304 | |
14 | All Valves for Automation | Teflon construction Pneumatic valves, operated by Comp. Air supply through Solenoid
valves. |
|
15 | Humidification | Special Humidifier for the purpose of humidification of the load and heating of the gas. | |
16 | Vacuum | Vacuum created by Ventury system. (Make: Festo) | |
17 | Automation Hardware | PLC Make: Kinco HMI Make: Kinco | |
18 | Process Reports with thermal printer | Reports are generated by the software for each and every cycle in three formats, viz. (i)
Single page Summary report and (ii) Detailed Report |
|
19 | Testing | Pressure / Vacuum testing as per specified standards. (1.5 times the working pressure) | |
20 | Operation | All functions are electro-pneumatically operated. Door closing is manual | |
21 | Loading Trolley | Fabricated with SS 304 | |
22 | Battery Backup | UPS system will be provided for battery backup. If power failure it will usable for 20 minutes for continuous power supply. | |
23 | Air Filter | 0.2 micron air filter also provided with machine for fresh air. |